Home / Media / Public Notices

Public Notices by Year

Planning and Environmental Documents for Public Review

Click here to view USACE Galveston District Planning and Environmental documents for public review.

Viewing & Comments

Viewing Notices: To view a full public notice or its associated drawings file (if any), click on either full public notice or permit drawings link in the attachments section. To download the file to your computer, right-click on the public notice or drawings link, then select "Save Target As" from the menu.

How to Send Comments on Regulatory Division Public Notices: Send comments to the Regulatory Division, U.S. Army Corps of Engineers, Galveston District, 2000 Fort Point Road, Galveston, Texas 77550 or by electronic mail to our Public Notice Comment Email. Comments made in reference to a public notice should include your name, address, phone number and the Department of the Army permit number referenced in the public notice (e.g. SWG-2015-00001).  

How to Send Comment on Other Galveston District Public Notices: Please follow the instructions included with the public notice. For Galveston District Planning and Environmental Documents for public review, please click here.

SWG-2017-00832 - MC Offshore Petroleum, LLC - Gulf of Mexico

Published June 14, 2018
Expiration date: 7/16/2018
PRINT | E-MAIL

Full Public Notice          Project Plans

PROJECT DESCRIPTION:  The applicant proposes to decommission-in-place 12-inch oil PSN 8585 located in water depth of approximately 600 feet.  In accordance with the Bureau of Safety and Environmental Enforcement (BSEE) 30 CFR 250.1750 pipeline decommissioning requirements, the applicant proposes to:  1) disconnect from previously serviced GC 52 CPP; 2) flush by pigging and filling with seawater to equalize the line pressure; 3) remove 20-foot section of pipeline upstream from the SSTI and plug; 4) remove the pipeline deck to jacket location and tube turn at GC 52 CPP and plug; and 5) confirm depth of cover at the pipeline ends and cover endpoints with protective sand/cement bags.  Jetting will be used to expose pipeline riser endpoints and allow pipe “cold cuts.”  The applicant’s plans are enclosed in 14 sheets.